Fiber-Picosecond Hybrid Pump Laser Marking Machine: Reducing Copper Reflection Damage

Home >> content-15 >> Fiber-Picosecond Hybrid Pump Laser Marking Machine: Reducing Copper Reflection Damage

Fiber-Picosecond Hybrid Pump Laser Marking Machine: Reducing Copper Reflection Damage

The Fiber-Picosecond Hybrid Pump Laser Marking Machine is an innovative solution that combines the precision of fiber lasers with the ultra-short pulse capabilities of picosecond lasers. This hybrid technology offers a unique set of advantages, particularly when it comes to marking on reflective materials like copper. The challenge with copper and other reflective metals is that they can reflect a significant portion of the laser light back towards the laser source, potentially causing damage. Here's how the Fiber-Picosecond Hybrid Pump Laser Marking Machine addresses this issue:

1. Ultra-Short Pulse Technology: Picosecond lasers produce pulses in the picosecond range, which is trillions of times shorter than the blink of an eye. This ultra-short pulse duration minimizes the heat-affected zone (HAZ), reducing the risk of damage to the material and the laser system itself. The rapid pulse allows the material to be marked without melting, which is crucial for reflective surfaces that can reflect energy back towards the laser.

2. High Repetition Rates: The picosecond laser component of the hybrid system can operate at high repetition rates, which means more pulses per second. This feature, combined with the high peak powers, results in a more efficient marking process that can handle reflective surfaces more effectively.

3. Lower Average Power: Despite the high peak powers, picosecond lasers operate at lower average powers compared to traditional nanosecond lasers. This reduces the overall heat input into the material, further minimizing the risk of reflection damage.

4. Better Absorption: The ultra-short pulses of picosecond lasers are more readily absorbed by copper and other metals due to a phenomenon known as multiphoton absorption. This increased absorption reduces the amount of energy that is reflected back, thus lowering the risk of damage to the laser system.

5. Fiber Laser Stability: The fiber laser component provides the system with the benefits of fiber lasers, such as high beam quality, stability, and the ability to deliver the laser beam over long distances with minimal loss. This stability is crucial for maintaining consistent marking quality on reflective materials.

6. Hybrid Efficiency: The combination of fiber and picosecond lasers in a hybrid system allows for the optimization of both pulse width and repetition rate, leading to a more efficient marking process that can handle the challenges presented by reflective materials like copper.

7. Adaptive Control Systems: Modern Fiber-Picosecond Hybrid Pump Laser Marking Machines are often equipped with adaptive control systems that can adjust the laser parameters in real-time to optimize the marking process. This adaptability is essential for dealing with the variable reflectivity of different materials.

In conclusion, the Fiber-Picosecond Hybrid Pump Laser Marking Machine represents a significant advancement in laser marking technology. By leveraging the benefits of both fiber and picosecond lasers, this hybrid system is capable of marking reflective materials like copper with precision and without the risk of damage due to reflection. This technology opens up new possibilities for high-quality, high-contrast marking on a wide range of materials, including those that have traditionally been difficult to mark effectively.

.

.

Previous page: Fiber-Excimer Hybrid Pump Laser Marking Machine: Dual Wavelength Capability Next page: Fiber-Femtosecond Hybrid Pump Laser Marking Machine: Crafting Nanostructures on Copper

Silicone laser marking can avoid edge burning by optimizing parameters

Achieving 40 mm Dropout with 3D Galvanometer in MOPA Laser Marking Machine for 170×170 mm Scan Field

Engraving Matching Verification Codes on Couple's Rings with a Laser Marking Machine

Real-time Barrel Distortion Compensation in Fiber Laser Marking Machines with 220×220 mm Scan Field

Impact of Water Chiller Temperature on Blackening Effect in Aluminum Laser Marking

Maintenance and Care for Long-Term Storage of Fiber Laser Marking Machines

Laser Marking of Titanium Alloy Medical Implants: Avoiding Cytotoxic Residues

Impact of 355 nm UV Laser Marking on the Flexural Strength of Crystal Glass Mobile Back Covers

Enhancing Precision with MOPA Laser Marking Machine: Real-Time Measurement of Engraving Depth Using Confocal Microscopy

The Application of Telecentric Lenses in ABS Curved Surface Laser Marking

Fiber-Picosecond Hybrid Pump Laser Marking Machine: Reducing Copper Reflection Damage