How to set an automatic serial number in laser marking software?
In the laser marking process, setting an automatic serial number is a very practical function, especially suitable for scenarios where mass production is required and each product needs a unique identification. The following are the detailed steps to set the automatic serial number in commonly used laser marking software (such as EZCAD) :
I. Preparatory Work
1. Check the connection status of the equipment: Ensure that the communication between the laser marking machine and the computer is normal and that the USB cable or network cable is firmly connected.
2. Open the marking software: Start the control software of the laser marking machine, such as EZCAD.
Ii. Set the automatic serial number
(1) Create a text field
In the workspace of the software, create a new text box for entering the serial number.
2. Enter an initial value in the text box, such as "00001", which will serve as the starting value of the serial number.
(2) Enable the variable text function
In the object properties bar on the left side of the software interface, find the "Enable Variable Text" option and check it.
2. Click the "Add" button, and a "Text Element" dialog box will pop up.
(3) Configure the serial number parameter
In the "Text Element" dialog box, select the "Serial Number" type.
2. Set the "Start sequence number" to "00001" and the "current sequence number" to "00001" as well.
3. Set the "serial number increment" to "1", indicating that each serial number increments by 1.
4. Set the "maximum serial number" to a relatively large value, such as "99999", or set it according to actual needs.
5. If necessary, "number per mark" can be set, indicating that the serial number increases once for each number of processed products.
(4) Adjust the display format
In the "Text Element" dialog box, you can set the display format of the serial number, such as whether to add zeros or the number of digits, etc.
2. Click the "OK" button to complete the setting of the serial number.
Iii. Testing and Application
1. Test marking: Conduct test marking on the scrap material to ensure that the display and increment functions of the serial number are normal.
2. Formal marking: After confirming that there are no errors, the formal marking begins. After each marking is completed, the serial number will increase automatically.
Iv. Precautions
1. Ensure correct parameters: Before formal production, it is essential to conduct multiple tests to ensure that parameters such as the starting value, increment, and maximum value of the serial number are set correctly.
2. Backup Settings: After completing the Settings, it is recommended to back up the current marking file and Settings for future reuse.
3. Software version compatibility: Ensure that the version of the laser marking software used supports the automatic serial number function.
By following the above steps, you can easily set the automatic serial number in the laser marking software, improve production efficiency and ensure the uniqueness of each product. If you encounter any problems during the setup process, you can refer to the software's help documentation or contact technical support for assistance.
.
.
Previous page: How does a laser marking machine mark QR codes? Next page: Can a laser marking machine print photos directly?
Diamond Inscription with Disc-Femtosecond Hybrid Laser Marking Machine
Does Faster Laser Marking Save Money?
Achieving Precise Scale Markings on Medical Catheters with UV Laser Marking Machines
Evaluating the Fading Rate of Aluminum Laser Marking Under UV Exposure
Reducing Bubbles in Plastic Laser Marking with "Defocusing" Technique
Efficient Field Lens Switching in a 500 mm Travel Z-Axis for Laser Marking Machine
Understanding Laser Marking on Leather: The White Edge Phenomenon
How to set an automatic serial number in laser marking software?
Can a laser marking machine print photos directly?
How does laser marking software call database variables?
What are the standards for marking barcodes with a laser marking machine?
How to set the power gradient in laser marking software?
Can the laser marking machine communicate with the PLC?
How does laser marking software achieve flying marking?
How should the frequency and pulse width of a laser marking machine be coordinated?
Is it true that the faster the laser marking machine is, the shallower it becomes?
Will a laser marking machine with 100% power damage the lens?