The vibrator of the 3D tabletop fiber laser marking machine uses a 3D dynamic focusing system to provide flexible Z-direction processing dimensions. The desktop fiber laser marking machine can easily achieve tasks such as 3D deep engraving and 3D relief engraving. In addition, our 3D desktop fiber laser marking machine excels at marking on a variety of surfaces such as steps, stairs, ladders, cones and other objects.
With front focusing technology and dynamic focusing, the focusing spot is thinner, faster and better. Suitable for large-scale multi-stage marking. It can realize laser marking on curved workpieces more accurately, with no scattering phenomenon during processing.
Aluminum operating platform conducts heat well and is not easily deformed or damaged. Dual red light system helps to find the focus quickly and accurately. Our 3D fiber laser marking machine does not use any consumables and requires minimal maintenance.
The 3D fiber laser marking machine is capable of marking on a wide range of materials, including metals such as steel, aluminum, nickel, copper, titanium and alloys, as well as ABS, ceramics and more.
Function
1, good beam quality: using Germany IPG and other reliable advanced fiber laser source, beam quality is far better than traditional solid-state lasers, focused spot diameter is less than 20um, divergence angle is 1/4 of diode-pumped lasers. especially suitable for precise and excellent marking.
2, low cost: the highest electric / optical conversion rate of up to 30%, the machine power consumption is less than 500W, is a lamp pumped solid-state laser marking machine 1/10, saving a lot of energy costs.
3, maintenance-free: the laser source does not require any maintenance, there is no need to adjust or clean the lens.
4, long service life of the laser source: fiber laser marking machine using laser diodes as a pump source, the average service life of up to 100,000 hours.
5, marking speed: marking speed is one, two laser marking machine more than three times.
High-definition transparent marking galvanometer
Highly transparent, clean lens without impurities, increase the amplitude, see the picture quality. Good lens to print good products
High electro-optical conversion efficiency
Using domestic and foreign fiber laser developed laser marking machine system, the output beam quality is good, high reliability, high electro-optical conversion efficiency
1. Surface marking: most suitable for marking on impermeable coatings, such as chrome, nickel, gold, silver and so on.
2. Deep engraving: Utilizing a high power laser, this process vaporizes the material to engrave into the base metal. Most commonly used in plastic injection molds, jewelry manufacturing and stamping dies.
3. Ablation: Removal of surface treatments (i.e. plating, paint coatings) to form a semi-transparent rounded back without damaging the substrate, widely used in the processing of backlit materials such as backlit buttons.