Marking Laser Scan Heads
CNMANLASER High-precision galvanometer scanning heads for laser marking machines
High-precision galvanometer scanning heads for laser marking machines
This galvanometer is used for high-speed marking and in-flight marking with a standard beam diameter of 10mm.
The scanners are characterized by zero drift, high speed, small size, low temperature and stable operation.
Motor Specifications
Scanning motor parameters
Operating temperature 0ºC-45ºC
Linearity: 99.9
Small order response time: ≤0.3ms
Proportional drift <40PPM/ºC
Zero drift <15μRad./ºC
Long time drift (8 hours continuous operation): <0.5mRad
Average operating current: 2.0A
Peak current: 15A (maximum)
Scanning Angle: ±15
Storage temperature: -10 - +60ºC
Resolution 12μRad
Repeatability: 8μRad
Input Diameter: 10.0 mm
Beam displacement 13.4 mm
Weight: 120 grams
Speed: 1-9000
Servo Drive Board Specifications
Servo Drive Board Parameters
Input voltage: ±15VDC
Interface: Digital signal (XY2-100)
Position signal input resistance: 1KΩ±1
Position signal input ratio: 0.33V/° 0.33V/°
Position Signal Output Ratio: 0.33V/° 0.33V/°
Operating temperature: 0ºC-45ºC 0ºC-45ºC
Driver board size (L*W*H): 75*55*30 mm